Search:

Austrian Crystals and Rhinestones for Craft Projects

Crystals and rhinestones are sparkling pieces of jewelry that look very similar too diamonds. They can be obtained in a myriad of shapes, colors and sizes, and are often used as jewelry or adornment pieces. Colors look very natural, and you can easily tell the colors of the stones from the names. Each color is given a unique name. A few examples, Emerald means green, Amethyst means purple, ruby or siam means red, and so on.

Using different colors is very important for any rhinestone projects. That is because for any pieces of art, different colors will convey different messages. An artist will tend to use craft pieces as a mode of expression, it is necessary to have stones of varied colors in order to allow artists to express their full desires

In addition, crystals and rhinestones can be had in lots of different sizes. Sizes are measured in "ss", also defined as "stone size". They range from a value of 5 to 48. The biggest stone can have a diameter that is up to 12mm. The tiniest stone could be as small as having a diameter that is less than 2mm.

Having different sizes mean artists can use these stones to express their different visions of the world. For example, ss5 stones could easily be used in a craft project to portray stars in a sky. Other things stones can represent include planets, treasures, etc.

A special characteristic about crystals and rhinestones is that they are formed with many reflective layers. As you shine a light on a stone, the light will be refracted in all directions. One can emphasize this feature on any project. For sure, the stones will superbly improve the general appearance of the project, and make it more attention catching.

Besides the beautiful outer appearance of crystals and rhinestones these stones are highly suitable for craft projects because some of these stones come with adhesive glue on their flat surface This makes them ideal for attaching to another surface.

These stones are commonly known as hot fix crystals or rhinestones. The name describes the adhering process quite accurately. The glue needs to be heated before attaching the stones Here is how it works.

Glue is located on the bottom of hot fix crystals. When heat is applied to the stone, the glue softens. This will allow the stone to be put on another surface and stick. The heat source is then removed, and the stone is allowed to cool for a few seconds. The glue hardened as it cools off, and after just a few short seconds, the stone is attached to the surface.

It is important to know that a special tool will be required to assist with the fixing process. You can use this process to fix stones to clothing, craft projects, and any other surface that you desire.

When you start work on your next project consider buying some Austrian crystals or rhinestones. When you buy wholesale, the prices are very reasonable.