Search:

Some Great Tips on Stained Glass Painting and Workshop Safety

You may have mastered stained glass construction, but stained glass painting seems like a mystery and looks difficult. Most stained glass crafters know little about the process and the materials needed for painting stained glass; but it should be just another step in the whole process of creating beautiful stained glass windows.

Painting on stained glass is done to add humanistic details of the face, hands, feet, or shading of the body and hair. Painting reduces the amount of cutting and leading of many tiny pieces of stained glass. Painting enhances the beauty, textures, and color that are already in the stained glass.

You can spend as little or as much as you want on stained glass painting tools and supplies. You can get started for as little as $20 to $100. You can save money by making some of your own stained glass painting equipment. Suppliers for stained glass paints and tools can be found by searching on the internet and at craft and supply stores. Be careful of the paints you choose because the paints for stained glass painting are specific.

Stained glass paint is a high-fired permanent paint which actually has glass (called the vehicle) in it. Stained glass paint also contains lead and has coloring agents like sand, alumina, clay, red or white lead oxide, boric acid, potassium and sodium. The lead in the stained glass paint refracts light. The matt (paint) can be applied, taken out in the tracing, fired, and then applied again, depending on the lighting, detail, and textures you want to achieve in your stained glass painting.

A few good brushes, spatulas, a small easel with a thick-plated glass surface, a light box and an inexpensive small, electric kiln would be a good start on supplies needed to do stained glass painting. In order to save money, you could build your own easel and light box and purchase a used kiln from ads in stained glass magazines or online. You can also make your own unique sticks and bridges which are wooden supports for your hand and arm for helping with paint stroke technique.

Your workshop safety tips

When you go to your stained glass supplier, do not bring small children. There is too big of a risk of being cut by glass and being exposed to toxic fumes, dust and lead. Most stained glass warehouses post signs requesting that small children do not go into areas where the stained glass is stored. Your local retail stained glass dealer would appreciate not having the stress of having a "bull in a China shop."

While grinding your stained glass, wear goggles that shield your eyes from all sides to prevent glass particles from getting in your eyes from underneath since the grinder is below eye level. It would also be a good idea to wear a paper mask to prevent breathing in the glass particles and dust that could be harmful to your sinuses and lungs.

When leading the stained glass pieces, wear gloves to protect you from exposure to lead poisoning. If you have cuts on your hands, cover them with band-aids. Pay careful attention to your hot soldering iron. Don't look away and reach for your iron. You might grasp the wrong end of the iron . . . the end that is several hundred degrees hot!

Common sense and a clean stained glass workshop will help keep you safe and add to your enjoyment of the art of stained glass.